deep well hand pumps, afridev hand pumps, hand water pumps, shallow well hand pumps, hand water pumps

PRODUCT RANGE

Shallow & Deep Well Hand Pump | Treadle Pumps | Cold Chain Equipment ( C E & W.H.O APPROVED ) / Medical Equipment. | Pipes / Casings

Tools | Builder Hardware | M.S. Fabrication & Galvanising | Emergency Relief Items | Chalk Board Drawing Set / School Stationaries

Shallow & Deep Well Hand Pumps

Click Here to Download Brochure

Afridev	India Mark II	Force Lift
India Mark III [50 mm NB]	India Mark III [65 mm NB]	India Mark II Extra deepwell
U3 Modified Hand pump	Ghana Modified hand pump

AOV International is one of the world’s leading manufacturer of community deep/ Shallow well water Hand pumps. Our pumps conform to the required relevant national and International standards. We are an ISO 9001: 2000 certified company.

We are manufacture a wide range of deep well and shallow Hand pumps, which includes the most popular India Mark II, India Mark III, India Mark II extra deep well Hand pumps etc of very high quality. These pumps are manufactured as per the specifications laid by the Bureau of Indian Standards. Besides, Afridev and U3 modified Deep-well Hand pumps are produced as per the specifications laid by SKAT HTN (Switzerland).

Deepwell Hand Pumps

Afridev

Pump Type : Afridev deep well hand pump as per SKAT-HTN Switzerland specifications, with 50mm dia open top, UPVC brass lined cylinder assembly with extractable plunger and foot valves assemblies.

Recommended for water level setting depth (metres) : upto 45 Meter.

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 990

UPVC Riser Pipe = 63mm OD * 4.7mm Wall Theckness * 3 Meter length
MS/SS Connecting Rod Diameter = 10mm
(12mm Dia can loaded also be supplied)
Stroke Length= 225± 6mm

Send a Request for Quotation ...

Click For Enlarge View

Cyclinder Assembly for Afridev hand pumps

Afridev Maintenace & Installation Card

India Mark II

Pump Type : India Mark II Deep well Hand pump as per Bureau of Indian Standard Specifications with 63.5mm dia cast iron brass sleeved cylinder assembly.

Recommended for water level setting depth (metres) : 20-45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 900

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 32 mm NB * 3 meter length
MS/SS Connecting Rod Diameter = 12mm * 3 meter length

Send a Request for Quotation ...

Click For Enlarge View

Cyclinder Assembly for India Mark II

Force Lift

Force lift and motorized Conversion kits/attachments are available for the deepwel pumps. The force lift pumping system/arrangement is designed to deliver water upto a height of 15 meters from ground level.

MS/SS Connecting Rod Diameter = 12mm

Send a Request for Quotation ...

Click For Enlarge View

Cyclinder Assembly for force lift

India Mark III [50 mm NB]

Pump Type : India Mark III well Hand pump as per Bureau of Indian Standard Specifications with 50 mm dia cast iron brass sleeved open cylinder assembly.

Recommended for water level setting depth (metres) :20*45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 600

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 65 mm NB * 3 Meter length
MS/SS Connecting Rod Diameter = 12mm * 3 Meter length

Send a Request for Quotation ...

Click For Enlarge View

Cyclinder Assembly for India Mark III (VLOM 50)

India Mark III (VLOM 65) Deepwell Hand Pumps

India Mark III [65 mm NB]

Pump Type : India Mark III Deep well Hand pump as per Bureau of Indian Standard Specifications with 63.5mm dia cast iron brass sleeved open top cylinder assembly.

Recommended for water level setting depth (metres) :20*45

Minimum ID of bore (milimetre) : 125

Approximate Discharge (Litres/Hour) : 900

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 65 mm NB * 3 meter length
MS/SS Connecting Rod Diameter = 12mm * 3 meter length

Send a Request for Quotation ...

Click For Enlarge View

Cyclinder Assembly for India Mark III (VLOM 65)

U3 Modified Hand pump

Pump Type : U3 modified deep well hand pump as per SKAT-HTN Switzerland specifications with 50mm dia open top, UPVC brass lined cylinder assembly with extractable plunger and foot valves assemblies.

Recommended for water level setting depth (metres) : 20-45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 600

UPVC - Riser Pipe 63 mm ODX 4.7wt*3meters length.

MS/SS Conneting Rod Dia = 12mm
Stroke Length= 125 ± 5mm

Send a Request for Quotation ...

Cyclinder Assembly for U3 Modified

Deepwell Hand Pumps
India Mark II Deepwell Hand Pumps	India Mark III (VLOM 65) Deepwell Hand Pumps	India Mark III (VLOM 50) Deepwell Hand Pumps
U3 Modified Deep Well Hand Pump	Afridev Deepwell Hand Pumps	Force Lift Pumping System
India mark II Extra Deep Well Hand Pump

Home | About Us | Contact Us | Enquiry